What this product is for:
The Fluoride Test Kit is a focused 5-test home kit for checking fluoride in drinking-water samples. It is useful when you want a practical level check, a household record, or a before-and-after check where a filtration or source question is involved.
What it tests:
- Fluoride additives at low levels in water samples.
- Testing range: 0-1.5ppm.
- Minimum detection: 0.1ppm.
- Each kit contains 5x Fluoride tests.
The UK standard:
The Drinking Water Inspectorate says: “The maximum permitted value of fluoride in drinking water is 1.5mg/l (milligrams per litre).” Fluoridation schemes aim for 1 mg/l.
Best for:
- Checking fluoride level where you already know fluoride is the specific question.
- Comparing samples before and after a household filtration change.
- Private-supply or local-context checks where source conditions may vary.
- Keeping a simple household record rather than commissioning a full laboratory panel.
How to use:
Follow the kit instructions and use the recommended sample point. For most drinking-water checks, the cold kitchen tap is the practical starting point unless the instructions or your situation require a different sample. Record the sample date, tap, source and any recent plumbing, taste, smell or supply changes.
What the result can and cannot tell you:
This is a home screening result for the sample tested at that time. It does not prove future safety, replace official mains-water investigation, or provide accredited laboratory confirmation.
What to do next:
If a result is unexpected, repeat the check with careful sampling and compare it with your known water source or local context. Use the fluoride hub or Result Interpretation Centre before deciding whether another test or laboratory confirmation is needed.
To compare with your supply's official figures: “You can obtain a free copy of the water quality test results for the water supply to your home or workplace by contacting your local water company.” (Drinking Water Inspectorate)
Reviews
The instructions are clear, the colour chart is easy to compare against, and results come through quickly. I tested a few taps around the house and compared to filtered water. It’s reassuring to be able to check fluoride levels yourself without sending anything to a lab.
Installed a new water filter and wanted proof it was doing its job.
Tested before. Tested after.
Seeing the difference made it worthwhile. Simple process, clear results, and gave me confidence in my setup.
Bought this simply to see what was actually in my local tap water. The test took only a few minutes and was easy to interpret. The sensitivity range feels right for drinking water levels.
Delivery was quick. The strips are easy to handle and results develop quickly. Having five tests means you can monitor changes over time instead of relying on a single reading.
Very low-level fluoride detection. It doesn’t feel overly complicated. Instructions are detailed but not overwhelming. Everything is laid out clearly and works as expected.